Computer Fundamentals MCQs > FREE SET - 15

1. What is the highest address possible if 16 bits are used for each address?
A 65536
B 12868
C 16556
D 643897

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

2. Which of the following memories contains a thin film of magnetic material sand witched between two permanent bias magnets?
A ROM
B Magnetic disk
C Core memory
D Bubble memory

Free MCQs www.sharemcq.com     Answer: Option C
Explanation:
Available Soon.

3. What is the name of the chip which has more than once processor on it?
A Parallel chip
B Multi-processor chip
C Transputer
D Parallel processor

Free MCQs www.sharemcq.com     Answer: Option C
Explanation:
Available Soon.

4. What is a portion of memory that serves as a temporary repository for data as it waits for a given action?
A Memory Pool
B Cache
C Processor
D Processor pool

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

5. Methods used to organize and physically store disk data are cylinder and
A Sector
B Surface
C Track
D Hib

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

6. A dot-matrix printer
A is an input device
B is an output device
C cannot print alphabet
D None of the above

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

7. The term "memory" applies to which one of the following
A Logic
B Storage
C Control
D Input device

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

8. The proper definition of a modern digital computer is
A an electronic automated machine that can solve problems involving words and numbers
B a more sophisticated and modified electronic pocket calculator
C any machine that can perform mathematical operations '
D a machine that works on binary code

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

9. Which of the following is used to make a programs run when the computer is switched on.
A Autoboot
B Warmboot
C Bubble
D Authentication

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

10. A reflective marker that indicates the end of the usable tape is
A End user
B End-of-tape
C Optical mark reader
D FAX

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

11. Which of the following are not likely to be found on a PC main circuit board
A RAM chips
B Microprocessor chips
C ROM chips
D LCD clocks

Free MCQs www.sharemcq.com     Answer: Option D
Explanation:
Available Soon.

12. Character readers are those devices which read the characters printed on the source documents and then convert them directly into computer-usable input. Which of the following is not a character reader?
A OCR
B MICR
C OMR
D LCD

Free MCQs www.sharemcq.com     Answer: Option D
Explanation:
Available Soon.

13. An optical input device that interprets pencil marks on paper media is
A O.M.R
B Punch card reader
C Optical scanners
D Magnetic tape

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

14. The first microprocessors produced by Intel Corpn. and Texas Instruments were used primarily to control small
A microwave ovens
B washing machines
C calculators
D personal computers

Free MCQs www.sharemcq.com     Answer: Option C
Explanation:
Available Soon.

15. The ASCII code for the character J is:
A 1001 0001
B 1001 1010
C 0100 1010
D 1010 0001

Free MCQs www.sharemcq.com     Answer: Option C
Explanation:
Available Soon.

16. The ALU of a computer normally contains a number of high speed storage elements called
A semiconductor memory
B registers
C hard disk
D magnetic disk

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

17. To locate a data item for storage is
A Field
B Feed
C Database
D Fetch

Free MCQs www.sharemcq.com     Answer: Option D
Explanation:
Available Soon.

18. The terminal device that functions as a cash register, computer terminal, and OCR reader is the:
A Data collection terminal
B OCR register terminal
C Video display terminal
D POS terminal

Free MCQs www.sharemcq.com     Answer: Option D
Explanation:
Available Soon.

19. A high quality CAD system uses the following for printing drawing and graphs
A Dot matrix printer
B Digital plotter
C Line printer
D All of the above

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

20. In the language of the computer profession, one thousand position of main storage is represented with the letter
A K
B L
C M
D C

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

21. The word 'Computer' usually refers to the Central Processor Unit plus
A External memory
B Internal memory
C Input devices
D Output devices

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

22. Communication using a modulated carrier to apply a data signal to a transmission medium in analog form is
A Local area network
B Modem
C Base band networking
D Broad band networking

Free MCQs www.sharemcq.com     Answer: Option D
Explanation:
Available Soon.

23. A device that can accept data, hold them & deliver them on demand at a later time is known as
A Buffer
B Memory
C CPU
D Register

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

24. An output device that converts data from a binary format in main storage to coded hole patterns punched into a paper tape is
A Paper tape punch
B Punched paper tape
C Magnetic disk
D Magnetic tape

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

25. First CAD system called AutoCAD for the PCs was announced in the year 1982. Can you tell who announced it?
A Intel Corpn.
B Rolta India Ltd.
C Autodesk Inc
D AT & T Corp.

Free MCQs www.sharemcq.com     Answer: Option C
Explanation:
Available Soon.

26. Most important advantage of an IC is its
A Easy replacement in case of circuit failure
B Extremely high reliability
C Reduced cost
D Low power consumption

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

27. The main purpose of time sharing techniques used in computers is to make the best use of the
A CPU
B peripherals
C seconday storage
D floppy disks

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

28. Which of the following is not true of immediate processing?
A It is often used in real-time applications
B It can occur with either sequential of direct-access files
C It can be used in an airline-reservation system
D Transactions are processed shortly after a real-world event occurs

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

29. When an input electrical signal A=10100 is applied to a NOT gate, its output signal is
A 01011
B 10001
C 10101
D 00101

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

30. What is the name of the earliest calculating machine which was based on concepts found in modern computers but was unfortunately never built?
A Babbage's Difference Engine
B Pascal's Adder
C Leibnitz's Multiplier
D Differential Analyser

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

31. The input unit of a computer
A feeds data to the CPU or memory
B retrieves data from CPU
C directs all other units
D All of the above

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

32. Which of the following is used as storage locations both in the ALU and the control section of a computer?
A accumulator
B register
C adder
D decoder

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

33. The accuracy of the floating point numbers representable into 16 bit words of a computer is approximately
A 16 digits
B 6 digits
C 4 digits
D All of the above

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

34. Which of the following is a special purpose language used to describe to a computer's operating system.
A LOGO
B APL
C ICL
D CORAL

Free MCQs www.sharemcq.com     Answer: Option C
Explanation:
Available Soon.

35. A technique for processing jobs on a first-come, first-served basis is known as
A FAX
B FIFO
C GIGO cable
D Optical mark reader

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

36. Data systems for planning are often called
A decision analysis systems
B planning analysis systems
C decision support systems
D All of the above

Free MCQs www.sharemcq.com     Answer: Option C
Explanation:
Available Soon.

37. A type of instruction that can produce several lines of machine language code is a
A Mnemonic
B Address
C Macro
D Assemble

Free MCQs www.sharemcq.com     Answer: Option C
Explanation:
Available Soon.

38. A common use of computer in office is for
A Distributed
B Word processing
C Data
D All of the above

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

39. Hard disks are formatted in the same manner as floppy disks. However, before a hard disk can be formatted, it must first be _________
A partitioned
B sectioned
C deleted
D inter-sectioned

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

40. A compiler means
A A person who compiles source programs
B The same thing as a programmer
C Keypunch operator
D A program which translates source program into object program

Free MCQs www.sharemcq.com     Answer: Option D
Explanation:
Available Soon.

41. A notation used to express clearly on algorithm is known as
A Algorithmic language
B Assembly language
C Machine language
D High level language

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

42. What process prepares the magnetic surface of a disk by creating concentric circles, called tracks, around the disk?
A Tracking
B Formatting
C Copying
D Sectioning

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

43. Which selection below best describes the term data processing?
A The collection of information or data
B The distribution of information or data
C The manipulation of information or data
D The storage of information or data

Free MCQs www.sharemcq.com     Answer: Option C
Explanation:
Available Soon.

44. A device that both transmits and receives data is
A Transducer
B Trapdoor
C Translator
D Transceiver

Free MCQs www.sharemcq.com     Answer: Option D
Explanation:
Available Soon.

45. Which of the following is a communication network that is devoted to carrying computer information.
A Data point
B Data module
C Data network
D Data pack

Free MCQs www.sharemcq.com     Answer: Option C
Explanation:
Available Soon.

46. The barcode which is used on all types of items, is read by a scanning device directly into the computer. What is the name of this scanning device?
A Laser scanner
B Wand
C OCR
D MICR

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

47. The main purpose of the off line device is
A To reduce the no.of operator errors in recording data
B To save computer time
C To save floor space in the computer centre
D All of the above

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

48. Symbolic languages were developed in
A 1962
B 1950
C 1974
D 1980

Free MCQs www.sharemcq.com     Answer: Option B
Explanation:
Available Soon.

49. As compared to diskettes, the hard disks are
A more expensive
B more portable
C less rigid
D slowly accessed

Free MCQs www.sharemcq.com     Answer: Option A
Explanation:
Available Soon.

50. Where does a computer add and compare data?
A Hard disk
B Floppy disk
C CPU chip
D Memory chip

Free MCQs www.sharemcq.com     Answer: Option C
Explanation:
Available Soon.


No comments:

Post a Comment

Your Feedback is hearty Requested to make the MCQs Collection better.

Popular Posts